MIL-T-47303A (MI)
The test set is designed to ensure prope
3.2 Design.
operation of the intervalometer/launcher combination, and t
the presence of a ground on the firing lines.
The construction of the MK IV elec
3.3 Construction.
test set shall be in accordance with Drawing 11554129 and t
The applicable requirements
requirements specified herein.
T-21200 for class 2 equipment shall apply whenever design
requirements are not specified in the drawing.
Unless otherwise specified by t
Manufacturing.
3.3.1
procuring activity, test set drawings or this specification,
manufacturing shall conform to the applicable MIL-STD-454
Responsibility sh
requirements as specified by MIL-T-21200.
assumed by the contractor for any malfunction, or failure o
part, subassembly, or assembly to pass the tests specified
(see 4.6).
All replaceable parts shall
Interchangeability.
3.3.2
manufactured to definite tolerances and clearances in order
any such parts of a particular type or model may be replaced
adjusted without requiring modification.
All screw threads shall conform
Screw threads.
3.3.3
STD-H28.
Surfaces of all parts shall be clean
3.3.4
Surfaces.
External surfaces shall be
free from extraneous materials.
All exterior corners shall be ro
and free from sharp edges.
3.3.5 Fastening devices.
All screws, pins, bolts, and
similar parts shall be installed with means for preventing
All such parts when subjected to removal or adju
tightness.
shall not be permanently deformed.
3.3.6 Identification of parts.
All parts shall be mar
accordance with the applicable requirement of MIL-STD-130.
The MK IV electrical test set dimen
3.3.7 Dimensions.
shall-be in accordance with drawing 11554129.
3.4
Performance
characteristics.
The MK IV electrical test set shal
3.4.1 Functionals.
incorporate provisions for performing the following test fun
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business