MIL-T-47303A (MI)
The test set shall be operable after being
Shock.
3.4.2.5
exposed to shock levels up to 20 g's having a time duration of
11 + 1 milliseconds (see 4.6.4.4).
The test set case shall be operable after
3.4.2.6 Impact.
being subjected to impacts on a concrete surface from a height of
30 inches (see 4.6.4.8).
3.4.2.7 Vibration.
The test set shall be operable after
being subjected to the vibration requirements for class 2 equipment
of MIL-T-21200 (see 4.6.4.5).
3.4.2.8 Watertightness.
The test set case shall not leak
when subjected to the spraytight requirements of MIL-STD-108 (see
4.6.4.6).
The test set shall be operable after being
3.4.2.9 Dust.
subjected to exposure to sand and dust particles for a period of 28
hours.
The test set shall have a specified mean
3.5 Reliability.
time between failures (MTBF) of 1000 hours (see 4.6.5).
The workmanship of the MK IV electrical
3.6 Workmanship.
The
test set shall conform to Requirement 9 of MIL-STD-454.
standards of workmanship exhibited in the approved first article
sample, subject to any qualification stated in the Government's
notice of approval, shall determine the requirements of the
remainder of the contract relative to workmanship.
4.
QUALITY
ASSURANCE
PROVISIONS
Unless otherwise
4.1 Responsibility for inspection.
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
Except as otherwise
(examinations and tests) as specified herein.
specified in the contract or purchase order, the contractor may use
his own or any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by the
Government.
The Government reserves the right to perform any of
the inspections set forth in this specification where such
inspections are deemed necessary to ensure supplies and services
conform to prescribed requirements.
Responsibility for compliance. All items shall meet
4.1.1
The inspection set forth in
all requirements of sections 3 and 5.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business